CO2 sensing properties and mechanism of PrFeO3 and NdFeO3 thick film sensor

The CO_2 sensing of PrFeO_3 and NdFeO_3 sensors were investigated. Experimental results show that the resistances for PrFeO_3 and NdFeO_3 in CO_2 gas are larger than those in air and the responses for PrFeO_3and NdFeO_3 sensors increase with an increase in room-temperature relative humidity. When exposed to1000 ppm CO_2, the response of PrFeO_3 thick film based on nano-powders annealed at 700℃can reach8.44 at 160℃for the background of wet air with 58%of room-temperature relative humidity (RH),which is much larger than the corresponding value (3.03) in wet air with 25%RH. The sensing response S of NdFeO_3 thick-film sensor based on nano-powders annealed at 600℃to 3000 ppm CO_2 at the operating temperature 200℃can reach 2.36 for the background of wet air with 72%RH, which is larger than the corresponding value (1.83) in the air with 25%RH. Compared with other CO_2 sensing materials, the PrFeO_3 sensor has larger response at lower operating temperature for CO_2 gas and may be used as a new CO_2 sensing material.     

Combating Biofilm Associated Infection In Vivo: Integration of Quorum Sensing Inhibition and Photodynamic Treatment based on Multidrug Delivered Hollow Carbon Nitride Sphere

Recently, quorum sensing (QS) inhibitors (QSIs) have been combined with antibiotics to enhance antibiofilm efficacy in vitro and in vivo. However, targeting QS signals alone is not enough to prevent bacterial infections. Drug resistance and recurrence of biofilms makes it difficult to eradicate. Herein, photodynamic therapy (PDT) is selected to unite QSIs and antibiotics. A synergistically antibiofilm system, which combines QSIs, antibiotics, and PDT based on hollow carbon nitride spheres (HCNSs) is envisaged. First, HCNS provides the multidrug delivering ability, enabling QSIs and antibiotics to be released in sequence. Subsequently, multistage releases sensitize bacteria effectively, potentiating the chemotherapeutic effects of the antibiotics. Finally, the integration of QSIs and PDT not only minimizes the possibility of drug resistance, but also overcomes the problem of limited mass and extension of PDT. Even after 48 h of incubation, the bacterial biofilm is obviously inhibited. And its biofilm disperse efficiency exceeds 48% (compared with QSI‐potentiated chemotherapy group) and 40% (compared with PDT group). Besides, the inhibition of the QS system influences phenotypes related to virulence factor production and surface hydrophobicity, which weaken biofilm invasion and formation. Eventually, this system is applied to disperse bacterial biofilm in vivo. Overall, PDT and QS modulation are devoted to eradicate drug resistance and recurrence of the biofilm.     

An Integrated Fuzzy Simulation-Optimization Model for Supporting Low Impact Development Design under Uncertainty

Water Resources Management - Seeking cost-effective design of urban hydrological facilities and drainage systems is an important task for many city planners. However, such a process has always been...     

Elastic Properties and Stacking Fault Energies of Borides,Carbides and Nitrides from First-Principles Calculations

Owing to the excellent elastic properties and chemical stability, binary metal or light element borides, carbides and nitrides have been extensively applied as hard and low-compressible materials. Researchers are searching for harder materials all the time. Recently, the successful fabrication of nano-twinned cubic BN(Tian et al. Nature 493:385–388, 2013) and diamond(Huang et al. Nature 510:250–253, 2014) exhibiting superior properties than their twin-free counterparts allows an efficient way to be harder. From this point of view, the borides, carbides and nitrides may be stronger by introducing twins, whose formation tendency can be measured using stacking fault energies(SFEs). The lower the SFEs, the easier the formation of twins. In the present study, by means of first-principles calculations, we first calculated the fundamental elastic constants of forty-two borides, seventeen carbides and thirty-one nitrides, and their moduli, elastic anisotropy factors and bonding characters were accordingly derived. Then, the SFEs of the {111} 112 glide system of twenty-seven compounds with the space group F43 m or Fm3m were calculated. Based on the obtained elastic properties and SFEs, we find that(1) light element compounds usually exhibit superior elastic properties over the metal borides, carbides or nitrides;(2) the 5 d transitionmetal compounds(ReB_2, WB, OsC, RuC, WC, OsN_2, TaN and WN) possess comparable bulk modulus( B) with that of cBN( B = 363 GPa);(3) twins may form in ZrB, HfN, PtN, VN and ZrN, since their SFEs are lower or slightly higher than that of diamond(SFE = 277 mJ/m~2). Our work can be used as a valuable database to compare these compounds.     

Background subtraction based on deep convolutional neural networks features

Multimedia Tools and Applications - Background modeling and subtraction, the task to detect moving objects in a scene, is a fundamental and critical step for many high level computer vision tasks....     

Molecular Dynamics Simulation on the Effect of MgO/Al2O3 Ratio on Structure and Properties of Blast Furnace Slag Under Different Basicity Conditions

Metallurgical and Materials Transactions B - The SiO2-Al2O3-CaO-MgO is the basic structural system of blast furnace slag and the composition directly affects the performance of the slag. Molecular...     

Electrocatalytic activity of LaSr3Fe3O10 and LaSr3Fe3O10-GO towards oxygen reduction reaction in alkaline medium

Oxygen reduction reaction(ORR) plays a critical role in many energy conversion and storage processes.Therein, a comparative study of the electrocatalytic activity for ORR in 0.1 mol/L KOH solution was conducted using layered perovskite-like LaSr_3 Fe_3 O_(10) and LaSr3 Fe_3 O_(10)-graphene oxide(GO) composite as electrodes. Linear sweep voltammetry(LSV) results show that the LaSr3 Fe_3 O_(10)-GO hybrid exhibits higher current density, a more positive onset potential(-0.15 V vs. Hg/HgO) in comparison with LaSr_3 Fe_3 O_(10).The value of the overall transferred electrons for both catalysts implies a dominant two electron process for ORR. Both catalysts under alkalic conditions exhibit a two-step Tafel slope, suggesting a change in the reaction mechanism for ORR. The composite electrode exhibits a higher ORR current density, but inferior durability performances in relative to the LaSr_3 Fe_3 O_(10) electrode.